The Adjustable Box Wrench can deal with nuts and bolts. It’s jaw is adjustable, allowing you to deal with almost any nut or bolt that you need to adjust.They usually cost around $35.

The adjustable wrench is an adjustable tool for gripping hexagonal nuts, with an adjustings crew in the head of the implement. To use, adjust the wrench so it fits over hex nut then tighten so it will turn and not slip off when turning. Turn clockwise or counterclockwise to either tighten or loosen the hex nut. Cost: 19.97$

This L shaped metal bar can be used on hexed bolts. It is the smallest and simplest wrench a person can use, but has limited uses. Cost is around 10$

Brief Description of Tool: Back a long time ago it was It is used to turn iron and steel pipes if they are damaged, replaced or if they need to make a new pipe section How do you use it? It is used to fit or remove air and water-piping from a locomotive When to use it: It used to be a common wrench which was used to repair things when fasteners use to be square rather than hex. Average price $10 to $20

Although this does not look like the typical wrench you would see, the Basin Wrench can manage nuts and hose couplings. They are mostly used in sinks. To use it, you just have to slide the top to the nut, and then use the handle to twist in or out the nut. The price of this tool depends on the material, producer, and manufacturer, but a general price may be $30.

A box end wrench is a wrench with a closed socket that can fit over a nut or a bolt. It is used when you are required to or need to tighten or loosen a bolt. To use it, turn wrench whichever way, clockwise or counterclockwise to tighten it or loosen it respectively Cost is 8.95$ per size

A chain wrench is a wrench for pipes It is used to turn large pipes and adjust chain circles around a pipe. It is used when pipes are needed to be removed or fixed Cost is around $33.29

This wrench has both an open end and box end. There is one on each end of the wrench. It is used instead of using both a box end wrench and open end wrench. Cost is $14.37

A male die stock wrench is used to cut or form the male portion of the mating pair. To use, You have to put it on a tool that accepts them, then you activate it and cut something. Use it when you need a special cut. Cost is 2-10$

It is used for tuning and changing the sounds of drums. To use, put it on the ends of the drum and tighten or loosen it to make heavier or lighter sounds This helps to create different types of music. Use it when the drum is not tuned correctly or if you want to change the sound or base. Cost is $5 to $10

It is just like a normal socket but with two sockets and its is used as a fastener. Use it by putting it over a nut or bolt and then just turn right to tighten and turn left to loosen the nut or bolt. Use it when you need to tighten or loosen a nut or bolt. You also use it if you want to put them in or take them out. Cost is $5 to $10

The Double Open End Wrench is designed for max grip. It allows for “Greater access to those hard to reach nuts, bolts, and fasteners”. Cost is around $20.

The fire hydrant wrench removes fire hydrant caps and open the cap of the fire hydrant mostly used by firemen. To use, unscrew the screws around the cap of the of the fire hydrant and then place the hose inside the tube. Use it when you need it for a fire or anything else that needs powerful water pressure. Average price around $30